Abbasi, Majid
Synthesis and characterization of cement- CNT composite produced by CVD process [Volume 4, Issue 3, 2017, Pages 295-302]
Ahmadi, Reza
Three-dimensional analysis of sound power transmission through thick laminated composite cylindrical shells [Volume 4, Issue 1, 2017, Pages 53-66]
Akbari, Davood
Visualization of Flow & Void In pultrusion Process of thermoplastic composites [Volume 4, Issue 4, 2018, Pages 453-463]
Alemipour, Zahra
Preparation of Fe-Mn nanowire alloys and the study of the effect of manganese content, annealing and electrodeposition frequency on their magnetic properties [Volume 4, Issue 3, 2017, Pages 255-262]
Aliofkhazraei, Mahmood
Mechanical behavior of Ni-Al2O3 nanocomposite coatings electroplated in the precence of organic compounds [Volume 4, Issue 3, 2017, Pages 245-254]
Amini, Saeed
Study of the effect of machining parameters on delamination in rotary ultrasonic machining process of glass fiber reinforced polymer composite by diamond core tool [Volume 4, Issue 1, 2017, Pages 67-74]
Ansari, Reza
Evaluation of impact strength of composites and fiber metal laminates hybridized with nanoclay after exposure to high temperature thermal shock [Volume 4, Issue 3, 2017, Pages 263-274]
Ashenai Ghasemi, Faramarz
A study on effect of titanium dioxide nanoparticles on the elastic modulus, impact and tensile strengths of polypropylene/linear low density polyethylene (PP/LLDPE) blends [Volume 4, Issue 4, 2018, Pages 386-390]
Ashory, Mohammad-Reza
Increasing robustness of solution versus noise for identifying delamination damage in composite plates using a hybrid method [Volume 4, Issue 2, 2017, Pages 125-134]
Azarafza2, Reza
Experimental and numerical analysis of composite lattice truncated conical structures with and without carbon nanotube reinforcements under axial compressive force [Volume 4, Issue 4, 2018, Pages 418-425]
B
Bagheri, Vahid
Experimental and numerical analysis of composite lattice truncated conical structures with and without carbon nanotube reinforcements under axial compressive force [Volume 4, Issue 4, 2018, Pages 418-425]
Bahari, Ali
Synthesis and characterization of cement- CNT composite produced by CVD process [Volume 4, Issue 3, 2017, Pages 295-302]
Baraheni, Mohammad
Study of the effect of machining parameters on delamination in rotary ultrasonic machining process of glass fiber reinforced polymer composite by diamond core tool [Volume 4, Issue 1, 2017, Pages 67-74]
Beheshti, Hamid
Effect of different triggering on crashworthiness of composite crash box [Volume 4, Issue 3, 2017, Pages 327-336]
Bemanifar, Saeed
Effect of milling time on microstructural characteristics of Mg-20 %vol SiC composite produced by mechanical milling [Volume 4, Issue 2, 2017, Pages 135-140]
C
Chaechi, Orang
Optimization of internal Pressure and Axial Feed in Metal composite Al-Cu Tubes Hydroforming Process with Genetic Algorithm [Volume 4, Issue 3, 2017, Pages 275-282]
Choudari Khameneh, Amir Mohammad
Three-dimensional analysis of sound power transmission through thick laminated composite cylindrical shells [Volume 4, Issue 1, 2017, Pages 53-66]
D
Damirchiloo, Sadegh
Determination of cohesive zone parameters in mode I delamination growth of a double cantilever beam specimen using inverse method [Volume 4, Issue 1, 2017, Pages 83-90]
Daneshpayeh, Sajjad
A study on effect of titanium dioxide nanoparticles on the elastic modulus, impact and tensile strengths of polypropylene/linear low density polyethylene (PP/LLDPE) blends [Volume 4, Issue 4, 2018, Pages 386-390]
Darvizeh, Abolfazl
Evaluation of impact strength of composites and fiber metal laminates hybridized with nanoclay after exposure to high temperature thermal shock [Volume 4, Issue 3, 2017, Pages 263-274]
Davar1, Ali
Experimental and numerical analysis of composite lattice truncated conical structures with and without carbon nanotube reinforcements under axial compressive force [Volume 4, Issue 4, 2018, Pages 418-425]
Divandari, Mehdi
Effect of preheating temperature on thickness and interfacial microstructure of Aluminum-Copper bimetallic composite produced by vertical centrifugal casting [Volume 4, Issue 4, 2018, Pages 391-398]
Divandari, Mehdi
Effect of rotational speeds and heat content on the production of Al- Brass bimetal composite [Volume 4, Issue 2, 2017, Pages 219-228]
E
Ebrahimi, Gholamreza
The investigation and comparison of mechanical propertise and microstructure Al/CNT and Al/CNT/Al2O3 copmosites produced by mixed accumulative roll bounding [Volume 4, Issue 4, 2018, Pages 464-470]
Ebrahimi, Saeed
Oblique crashworthiness optimization and sensitivity analysis of tapered sandwich columns [Volume 4, Issue 1, 2017, Pages 25-34]
Enayati, Mohammad Hossein
Production and characterization of Cobalt/Vanadium Boride composite powder by mechanochemical method and acid leaching [Volume 4, Issue 1, 2017, Pages 75-82]
Esbati, AmirHossein
Multiscale modeling of fracture in polymer nanocomposite reinforced by intact and functionalized CNTs [Volume 4, Issue 1, 2017, Pages 35-46]
Eslami-Farsani, Reza
A study on the flexural response of grid composites containing multi-walled carbon nanotubes [Volume 4, Issue 1, 2017, Pages 101-108]
Eslami-Farsani, Reza
Experimental study of tensile behavior of self-healing fiber-metal laminates composites with chopped hollow glass fibers [Volume 4, Issue 4, 2018, Pages 399-404]
F
Fallah, Abolfazl
Free vibrations analaysis of functionally graded composite rectangular na-noplate based on nonlocal exponential shear deformation theory in thermal environment [Volume 4, Issue 1, 2017, Pages 109-120]
Ghaharpour, Fatemeh
Synthesis and characterization of cement- CNT composite produced by CVD process [Volume 4, Issue 3, 2017, Pages 295-302]
Ghajar, Rahmatollah
Investigation of nanotubes’ length and their agglomeration effects on the elastoplastic behavior of polymer-based nanocomposites [Volume 4, Issue 2, 2017, Pages 229-240]
Ghasemi, Ismail
A study on effect of titanium dioxide nanoparticles on the elastic modulus, impact and tensile strengths of polypropylene/linear low density polyethylene (PP/LLDPE) blends [Volume 4, Issue 4, 2018, Pages 386-390]
Ghasemi-Ghalebahman, Ahmad
Increasing robustness of solution versus noise for identifying delamination damage in composite plates using a hybrid method [Volume 4, Issue 2, 2017, Pages 125-134]
Ghasemi-Ghalebahman, Ahmad
Effect of damping on nonlinear forced vibration response of graphene-based nanocomposites [Volume 4, Issue 2, 2017, Pages 141-150]
Gholami, Mohammad Javad
Micromechanics of stress transfer through the interphase in pull out test of fiber through the resin [Volume 4, Issue 3, 2017, Pages 283-294]
Gholami, Morteza
Effect of preheating temperature on thickness and interfacial microstructure of Aluminum-Copper bimetallic composite produced by vertical centrifugal casting [Volume 4, Issue 4, 2018, Pages 391-398]
Gholami, Morteza
Effect of rotational speeds and heat content on the production of Al- Brass bimetal composite [Volume 4, Issue 2, 2017, Pages 219-228]
Golzar, Mohammad
Visualization of Flow & Void In pultrusion Process of thermoplastic composites [Volume 4, Issue 4, 2018, Pages 453-463]
H
Hashemi, Ramin
Investigation of mechanical properties, fracturgeraphi and microstructure of layered Al/Cu composite produced by cold roll bonding [Volume 4, Issue 3, 2017, Pages 311-318]
Heidari-Raran, Mohammad i
Effect of different triggering on crashworthiness of composite crash box [Volume 4, Issue 3, 2017, Pages 327-336]
Hiteh, Ehsan
Effect of preheating temperature on thickness and interfacial microstructure of Aluminum-Copper bimetallic composite produced by vertical centrifugal casting [Volume 4, Issue 4, 2018, Pages 391-398]
Hoseinipoor, Seyed Jamal
Effect of milling time on microstructural characteristics of Mg-20 %vol SiC composite produced by mechanical milling [Volume 4, Issue 2, 2017, Pages 135-140]
I
Irani, Saied
Multiscale modeling of fracture in polymer nanocomposite reinforced by intact and functionalized CNTs [Volume 4, Issue 1, 2017, Pages 35-46]
J
Jafari1, Mohammad
Determination of Optimal Parameters for Orthotropic Plates with Pentagonal Cutout by Imperialist Competitive Algorithm [Volume 4, Issue 2, 2017, Pages 161-170]
Jahani, Mahsa
Effect of different triggering on crashworthiness of composite crash box [Volume 4, Issue 3, 2017, Pages 327-336]
Jalalian Mirzapour, Navid
Experimental Investigation of Dynamic Behavior of Composite Sandwich Panel Using Self-healing Materials under CHARPY impact and 3-point Bending Destruction [Volume 4, Issue 4, 2018, Pages 434-442]
K
Kabiri Ataabadi, Abdulreza
Buckling of composite plate made of curvilinear fiber with linear and nonlinear fiber orientation variation [Volume 4, Issue 4, 2018, Pages 405-417]
Karimi, Majid
Investigation of nanotubes’ length and their agglomeration effects on the elastoplastic behavior of polymer-based nanocomposites [Volume 4, Issue 2, 2017, Pages 229-240]
Kazemi, Shahab
Investigation the mechanical and microstructural propreties of copper surface composite Cu/SiO2 fabricated by friction stir processing [Volume 4, Issue 4, 2018, Pages 426-433]
Kheirikhah, Mohammad Mahdi
Modeling and intelligent control of vibration of cantilever composite plate embedded with shape memory alloy wires [Volume 4, Issue 4, 2018, Pages 363-374]
Khorsand, Hamid
Mechanical behavior of Ni-Al2O3 nanocomposite coatings electroplated in the precence of organic compounds [Volume 4, Issue 3, 2017, Pages 245-254]
Khorshidi, Korosh
Free vibrations analaysis of functionally graded composite rectangular na-noplate based on nonlocal exponential shear deformation theory in thermal environment [Volume 4, Issue 1, 2017, Pages 109-120]
Khosravi, Hamed
A study on the flexural response of grid composites containing multi-walled carbon nanotubes [Volume 4, Issue 1, 2017, Pages 101-108]
Khosravi, Hamed
Experimental study of tensile behavior of self-healing fiber-metal laminates composites with chopped hollow glass fibers [Volume 4, Issue 4, 2018, Pages 399-404]
Kokabi, Mohammad-Javad
Increasing robustness of solution versus noise for identifying delamination damage in composite plates using a hybrid method [Volume 4, Issue 2, 2017, Pages 125-134]
Kordkheili, Seyed Ali Hosseini
Fatigue life prediction of cross-ply laminated composite plates using the kinetic theory of fracture [Volume 4, Issue 1, 2017, Pages 47-52]
L
Liaghat, Gholamhossein
Oblique crashworthiness optimization and sensitivity analysis of tapered sandwich columns [Volume 4, Issue 1, 2017, Pages 25-34]
Liyaghat, Gholam Hosain
Transient heat transfer analysis in composite metal cylindrical vessel using the layerwise theory and differential quadrature method [Volume 4, Issue 3, 2017, Pages 347-358]
M
Madoliat, Reza
Effect of damping on nonlinear forced vibration response of graphene-based nanocomposites [Volume 4, Issue 2, 2017, Pages 141-150]
Malekzadeh, Keramat
An Investigation into the Comparison between Hot and Cold Forming of Copper-Aluminum Composite Tubes by utilizing Hydroforming and Gasforming Processes [Volume 4, Issue 2, 2017, Pages 205-218]
Malekzadeh Fard, Keramat
Determination of Optimal Parameters for Orthotropic Plates with Pentagonal Cutout by Imperialist Competitive Algorithm [Volume 4, Issue 2, 2017, Pages 161-170]
Malekzadeh Fard, Keramat
Effect Of Dimensions Smart Attached Mass And Local Stiffness On Dynamic Response Of Thick Plates [Volume 4, Issue 4, 2018, Pages 443-452]
Manafi, Davood
Optimization of internal Pressure and Axial Feed in Metal composite Al-Cu Tubes Hydroforming Process with Genetic Algorithm [Volume 4, Issue 3, 2017, Pages 275-282]
Mashreghi, Alireza
Fabrication and phases study in Al/(Al2O3+AlxVy+AlaNib) in situ composite [Volume 4, Issue 3, 2017, Pages 303-310]
Masoumi, Ali Asghar
Transient heat transfer analysis in composite metal cylindrical vessel using the layerwise theory and differential quadrature method [Volume 4, Issue 3, 2017, Pages 347-358]
Mirzamohammadi, Sadegh
Mechanical behavior of Ni-Al2O3 nanocomposite coatings electroplated in the precence of organic compounds [Volume 4, Issue 3, 2017, Pages 245-254]
Mohabbati, Fatemeh
Experimental study of tensile behavior of self-healing fiber-metal laminates composites with chopped hollow glass fibers [Volume 4, Issue 4, 2018, Pages 399-404]
Mohamadipour, Mohammad Hosain
Visualization of Flow & Void In pultrusion Process of thermoplastic composites [Volume 4, Issue 4, 2018, Pages 453-463]
Mohammad-Hanifeh, Ghasem
Effect of damping on nonlinear forced vibration response of graphene-based nanocomposites [Volume 4, Issue 2, 2017, Pages 141-150]
Mohammadi1, Bijan
Matrix Cracking and Induced Delamination in Symmetrically Laminated Composites Subjected to Static Loading by using Multi Scale Damage Mechanics [Volume 4, Issue 1, 2017, Pages 9-24]
Mohammad Javad Mahdavizade, Seyyed
Micromechanics of stress transfer through the interphase in pull out test of fiber through the resin [Volume 4, Issue 3, 2017, Pages 283-294]
Mohieddin Ghomshei, Mohammad Mansour
Stress analysis of single-lap bonded joints in composite tubes
under torsion and hygrothermal effects using DQM [Volume 4, Issue 4, 2018, Pages 375-385]
Mojabi, Shima sadat
Modeling and intelligent control of vibration of cantilever composite plate embedded with shape memory alloy wires [Volume 4, Issue 4, 2018, Pages 363-374]
Mokhtari, Majid
Numerical and experimental analysis of dynamical behavior of composite T-joint with step wise graded adhesive zone based on functional behavior model [Volume 4, Issue 3, 2017, Pages 319-326]
Mondali1, Mehdi
A novel model for homogenization of multi-phase composites with high volume fraction of inclusions [Volume 4, Issue 2, 2017, Pages 195-204]
Montazeri, Abbas
Investigation of nanotubes’ length and their agglomeration effects on the elastoplastic behavior of polymer-based nanocomposites [Volume 4, Issue 2, 2017, Pages 229-240]
Morad Sheikhi, , Mohammad Morad Sheikhi1
Optimization of internal Pressure and Axial Feed in Metal composite Al-Cu Tubes Hydroforming Process with Genetic Algorithm [Volume 4, Issue 3, 2017, Pages 275-282]
Morad-Sheikhi, Mohamad
An Investigation into the Comparison between Hot and Cold Forming of Copper-Aluminum Composite Tubes by utilizing Hydroforming and Gasforming Processes [Volume 4, Issue 2, 2017, Pages 205-218]
N
Najafi, Mojgan
Preparation of Fe-Mn nanowire alloys and the study of the effect of manganese content, annealing and electrodeposition frequency on their magnetic properties [Volume 4, Issue 3, 2017, Pages 255-262]
Najafi, Moslem
Evaluation of impact strength of composites and fiber metal laminates hybridized with nanoclay after exposure to high temperature thermal shock [Volume 4, Issue 3, 2017, Pages 263-274]
Nopour, Hossein
Buckling of composite plate made of curvilinear fiber with linear and nonlinear fiber orientation variation [Volume 4, Issue 4, 2018, Pages 405-417]
P
Parsaee, Ahmad
A novel model for homogenization of multi-phase composites with high volume fraction of inclusions [Volume 4, Issue 2, 2017, Pages 195-204]
Payganeh, Gholamhasan
An Investigation into the Comparison between Hot and Cold Forming of Copper-Aluminum Composite Tubes by utilizing Hydroforming and Gasforming Processes [Volume 4, Issue 2, 2017, Pages 205-218]
Pourmoayed, Ali Reza
Determination of Optimal Parameters for Orthotropic Plates with Pentagonal Cutout by Imperialist Competitive Algorithm [Volume 4, Issue 2, 2017, Pages 161-170]
Pourmoayed, Ali Reza
Effect Of Dimensions Smart Attached Mass And Local Stiffness On Dynamic Response Of Thick Plates [Volume 4, Issue 4, 2018, Pages 443-452]
R
Rabiei Faradonbeh, Salman
Production and characterization of Cobalt/Vanadium Boride composite powder by mechanochemical method and acid leaching [Volume 4, Issue 1, 2017, Pages 75-82]
Rahimi Sharbaf Moghadas, Gholam Hosain
Transient heat transfer analysis in composite metal cylindrical vessel using the layerwise theory and differential quadrature method [Volume 4, Issue 3, 2017, Pages 347-358]
Rahmatabadi, Davood
Investigation of mechanical properties, fracturgeraphi and microstructure of layered Al/Cu composite produced by cold roll bonding [Volume 4, Issue 3, 2017, Pages 311-318]
Rajabi, fatemeh
Preparation of Fe-Mn nanowire alloys and the study of the effect of manganese content, annealing and electrodeposition frequency on their magnetic properties [Volume 4, Issue 3, 2017, Pages 255-262]
Rajabi, Mohammad
Effect of milling time on microstructural characteristics of Mg-20 %vol SiC composite produced by mechanical milling [Volume 4, Issue 2, 2017, Pages 135-140]
Razavi, Seyed Hossein
Study of strengthening mechanisms in an Al-Cu-Ti metallic glass reinforced Al matrix composite consolidated by ECAP process [Volume 4, Issue 2, 2017, Pages 171-178]
Rezaei, Mohammad Reza
Study of strengthening mechanisms in an Al-Cu-Ti metallic glass reinforced Al matrix composite consolidated by ECAP process [Volume 4, Issue 2, 2017, Pages 171-178]
Rikhtegar, Farshid
Investigation of microstructure and mechanical properties of Al2024-CNT nanocomposite produced by flake powder metallurgy process [Volume 4, Issue 1, 2017, Pages 91-100]
S
Sabet, Alireza
Assessment of mixed adhesive in single lap and peel joint with composite substrate [Volume 4, Issue 2, 2017, Pages 189-194]
Saghafian, Hassan
Investigation of microstructure and mechanical properties of Al2024-CNT nanocomposite produced by flake powder metallurgy process [Volume 4, Issue 1, 2017, Pages 91-100]
Sahraeian, Razi
Assessment of mixed adhesive in single lap and peel joint with composite substrate [Volume 4, Issue 2, 2017, Pages 189-194]
Salamat-talab, Mazaher
Determination of cohesive zone parameters in mode I delamination growth of a double cantilever beam specimen using inverse method [Volume 4, Issue 1, 2017, Pages 83-90]
Shabestari, Saeed
Investigation of microstructure and mechanical properties of Al2024-CNT nanocomposite produced by flake powder metallurgy process [Volume 4, Issue 1, 2017, Pages 91-100]
Shabestari, Saeed
Study of strengthening mechanisms in an Al-Cu-Ti metallic glass reinforced Al matrix composite consolidated by ECAP process [Volume 4, Issue 2, 2017, Pages 171-178]
Shahbazi Karami, Javad
Optimization of internal Pressure and Axial Feed in Metal composite Al-Cu Tubes Hydroforming Process with Genetic Algorithm [Volume 4, Issue 3, 2017, Pages 275-282]
Shahbazi-Karami, Javad Shahbazi-Karami1
An Investigation into the Comparison between Hot and Cold Forming of Copper-Aluminum Composite Tubes by utilizing Hydroforming and Gasforming Processes [Volume 4, Issue 2, 2017, Pages 205-218]
Shahi, Reza
Stress analysis of single-lap bonded joints in composite tubes
under torsion and hygrothermal effects using DQM [Volume 4, Issue 4, 2018, Pages 375-385]
Shahrabi-Farahani, Alireza
A study on the flexural response of grid composites containing multi-walled carbon nanotubes [Volume 4, Issue 1, 2017, Pages 101-108]
Shahravi, Morteza
Numerical and experimental analysis of dynamical behavior of composite T-joint with step wise graded adhesive zone based on functional behavior model [Volume 4, Issue 3, 2017, Pages 319-326]
Shahrokhinasab, Sahar
Assessment of mixed adhesive in single lap and peel joint with composite substrate [Volume 4, Issue 2, 2017, Pages 189-194]
Sharifi, Hassan
Production and characterization of Cobalt/Vanadium Boride composite powder by mechanochemical method and acid leaching [Volume 4, Issue 1, 2017, Pages 75-82]
Shokrieh, Mahmood Mehrdad
Determination of cohesive zone parameters in mode I delamination growth of a double cantilever beam specimen using inverse method [Volume 4, Issue 1, 2017, Pages 83-90]
Shokrieh, Mahmood Mehrdad
Buckling of composite plate made of curvilinear fiber with linear and nonlinear fiber orientation variation [Volume 4, Issue 4, 2018, Pages 405-417]
Shokrieh, Mahmoud-Mehrdad
A novel model for homogenization of multi-phase composites with high volume fraction of inclusions [Volume 4, Issue 2, 2017, Pages 195-204]
Siahpush, Ali
Free vibrations analaysis of functionally graded composite rectangular na-noplate based on nonlocal exponential shear deformation theory in thermal environment [Volume 4, Issue 1, 2017, Pages 109-120]
Siahpush, Ali
Electro-Mechanical free vibrations analysis of composite rectangular piezoelectric nanoplate using modified shear deformation theories [Volume 4, Issue 2, 2017, Pages 151-160]
Soltani, Zahra
Fatigue life prediction of cross-ply laminated composite plates using the kinetic theory of fracture [Volume 4, Issue 1, 2017, Pages 47-52]
T
Tabesh, Ali
The investigation and comparison of mechanical propertise and microstructure Al/CNT and Al/CNT/Al2O3 copmosites produced by mixed accumulative roll bounding [Volume 4, Issue 4, 2018, Pages 464-470]
Taheri-Behrooz, Fathollah
Micromechanics of stress transfer through the interphase in pull out test of fiber through the resin [Volume 4, Issue 3, 2017, Pages 283-294]
Talebitooti, Roohollah
Three-dimensional analysis of sound power transmission through thick laminated composite cylindrical shells [Volume 4, Issue 1, 2017, Pages 53-66]
Tayyebi, Moslem
Investigation of mechanical properties, fracturgeraphi and microstructure of layered Al/Cu composite produced by cold roll bonding [Volume 4, Issue 3, 2017, Pages 311-318]
Toozandehjani, Hossein
Fatigue life prediction of cross-ply laminated composite plates using the kinetic theory of fracture [Volume 4, Issue 1, 2017, Pages 47-52]
Torabi, Ali Reza
Crack growth trajectory prediction in V-notched polymeric specimen under combined compressive-shear loading conditions [Volume 4, Issue 3, 2017, Pages 337-346]
V
Vahdatazad, Nader
Oblique crashworthiness optimization and sensitivity analysis of tapered sandwich columns [Volume 4, Issue 1, 2017, Pages 25-34]
Vahdat Azad, Abazar
Investigation of attached mass effect on flutter speed of cantilever composite plate in supersonic flow [Volume 4, Issue 2, 2017, Pages 179-188]
Y
Yarmohammad Tooski, mehdi
Experimental Investigation of Dynamic Behavior of Composite Sandwich Panel Using Self-healing Materials under CHARPY impact and 3-point Bending Destruction [Volume 4, Issue 4, 2018, Pages 434-442]
Z
Zamani, Mohammad Reza
A study on the flexural response of grid composites containing multi-walled carbon nanotubes [Volume 4, Issue 1, 2017, Pages 101-108]
Zarei, Mehdi
Free vibration analysis of grid stiffened composite conical shells [Volume 4, Issue 1, 2017, Pages 1-8]
Zolghadr, Naser
Effect Of Dimensions Smart Attached Mass And Local Stiffness On Dynamic Response Of Thick Plates [Volume 4, Issue 4, 2018, Pages 443-452]